Safety production is not only about personal life safety, but also the safety of machinery. In the production process, there will inevitably be problems of one kind or another. The cutting machine is the most mundane type of machinery used in the light industry, but many companies I often encounter the problem of unstable pressure on the cutting machine. What is the cause of this problem?
The product is not cut in place, and the product and waste are torn continuously; indirect cutting is uneven.
Now that you know the cause of the pressure instability of the cutting machine, what are the specific solutions? Let's take a brief look at the solution!
1. Depth time system abnormality: The timing is not accurate or the solenoid valve power supply is unstable; the time relay is required to be replaced.
2. the abnormality of the stroke switch: the situation of sometimes spiritual, sometimes not working; need to replace the travel switch.
3. the relay and other related electrical components loose: causing poor contact, resulting in the reversing valve not in place; need to tighten the connection end.
4. oil pump wear: resulting in insufficient oil supply; need to replace the oil pump.
5. the inner cylinder leakage: resulting in pressure relief; need to replace the cylinder.
6. The die line is too long: it is beyond the scope of equipment capacity; it needs to use equipment that matches the die line.
7. The hydraulic oil is too dirty, and the oil filter is clogged: the oil supply is insufficient; the filter element needs to be cleaned or replaced.
8.the solenoid valve spool is issued, not smooth: resulting in insufficient supply of the cylinder; need to clean the solenoid valve spool.